Telemetry older Kosmik 160 and Spirit GTR

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
dutchie
Posts: 2
Joined: Sun 08. Nov 2026 8:45:08

Hello,
I need some help with telemetry. I have an older Kontronik Kosmik 160 with firmware version 4.17.
I have a Spirit GTR installed in my helicopter. What’s the correct way to connect everything these days?
The Spirit Wiki says the following: Use the KONTRONIK v2 telemetry cable from the Spirit e-shop; plug one end of the cable into the SAT1 port on the GTR, and the other end (5-pin JST) into the middle connector on the Kosmik.
But I found a thread on Helifreak where this method is described as not working (https://www.helifreak.com/showthread.php?t=952457), and it’s recommended to use the cable from Kontronik (post #8 in that thread), Plug one end of the cable into the left connector on the Kosmik and the other end into the E1 port on the GTR.
I’m a little unsure now and don’t want to break anything, so I’m hoping to get some help here.

Thanks in advance for your tips!
Best regards,
Jan

Translated with DeepL.com (free version)

Hallo,
ich brauche Unterstützung bei der Telemetrie, ich habe einen älteren Kontronik Kosmik 160, FW ist 4.17.
Im Heli ist ein Spirit GTR verbaut, wie ist heutzutage der richtige Weg alles anzuschließen?
In der Spirit-Wiki steht folgendes: Telem KONTRONIK v2 cable vom Spirit eshop, 1 Ende vom Kabel in den SAT1-Port am GTR, das andere Ende (5-pin JST) im mittleren Anschluß vom Kosmik.
Aber bei Helifreak habe ich einen Thread gefunden, da wird diese Variante als nicht funktionierend beschrieben (https://www.helifreak.com/showthread.php?t=952457) und es wird empfohlen das Kabel von Kontronik zu benutzen (Post Nr.8 im genannten Thread), 1 Ende vom Kabel im linken Anschluß vom Kosmik und das andere Ende im E1-Port vom GTR.
Ich bin jetzt etwas unsicher und möchte nichts kaputt machen und hoffe hier Hilfe zu bekommen.

Schon mal vielen Dank für euere Tipps!
Viele Grüße
Jan
Till
Posts: 33
Joined: Sat 06. Jun 2020 14:50:22

Funktioniert bei mir seit fast 10 Jahren völlig problemlos, du brauchst nur das richtige Kabel:
https://manual.spirit-system.com/index. ... _Telemetry
dutchie
Posts: 2
Joined: Sun 08. Nov 2026 8:45:08

Hi Till,
Thanks in advance—I've ordered the cable and will test it next week.
If everything works out, I'll get back to you.
Best regards,
Jan

Hallo Till,
schon mal vielen Dank, ich habe das Kabel bestellt und werde es nächste Woche testen.
Wenn alles läuft werde ich mich nochmal melden.
Viele Grüße
Jan
Post Reply