couple questions

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
leatherface
Posts: 72
Joined: Wed 08. Oct 2014 11:21:06
Location: sydney,australia

spirit is set up,but noticed on the workbench when i hit aileron stick full travel left or right,the elevator servo will suddenly move quite a bit,but only when at aileron limit.is it possible i have to much aileron travel?not really sure what to check to fix this.also when rescue acro is set will the spirit apply negative or positive pitch depending which way up it is after rescue switch is hit?
ZeXx86
Site Admin
Posts: 12831
Joined: Mon 29. Apr 2013 16:06:44
Contact:

Which receiver connection do you use?
If you move only with aileron, elevator servo shouldn't move at all.

Yes, Rescue Acro is working in the inverted flight as well. Be sure you have configured collective pitch for the rescue correctly.
Spirit System developer
leatherface
Posts: 72
Joined: Wed 08. Oct 2014 11:21:06
Location: sydney,australia

hi,i use spectrum satellite connection.i initially binded to dsmx but weird things were happening in diagnostics page,so i tried binding to dsm2 and that worked,so currently binded to dsm2.
ZeXx86
Site Admin
Posts: 12831
Joined: Mon 29. Apr 2013 16:06:44
Contact:

Good. Then I guess your Cyclic Ring limit is too high that servos are binding or are out of their travel. Try to decrease this parameter.
Spirit System developer
Post Reply