Bailout and tail

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
thekarma
Posts: 10
Joined: Sat 17. Jan 2015 18:46:43

I'm being stupid but how do I set the gain to negative on the sensor tab... All I have is sensitivity (Cyclic and rudder common gain, both positive). Reverse and rotation speed...
Top
ZeXx86
Site Admin
Posts: 12782
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

After unassigning Gyro Gain function in General/Channel Assignment it will be visible in Sensor Tab. It is hidden now.
Spirit System developer
Top
Yogi43
Posts: 86
Joined: Sun 28. Dec 2014 22:39:47

ZeXx86 wrote:If you want to switch between conventional flight, stabilisation and rescue (with only one switch on your TX), you can do so with unassigned Gyro channel, so you can configure Gyro Gain (in the software - Sensor Tab) to negative positions for Bank 1 and 2, but for Bank 0 it will be positive.
So activation will be performed with Bank switching only, but Gyro Gain will be configured in the software.


There is also the possibility to switch the GyroGain to negative by using a mixer on the same switch used for the banks. I have done so - it is working great.

Gesendet von meinem GT-I9515 mit Tapatalk
Top
Post Reply

Return to “Support”