Porpoising during fff

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Ktm250
Posts: 76
Joined: Sun 02. Nov 2014 18:12:56

I have been trying to tune my spirit unit in on my 250 and have noticed that during fast forward flight I get porpoising. Is there a setting in the spirit unit that could cause this. Could it be that my cyclic gain is to high?
Thanks.
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes, it could be the problem.

Also do you have flybarless lades on the helicopter?
Spirit System developer
Top
Ktm250
Posts: 76
Joined: Sun 02. Nov 2014 18:12:56

I am assuming that they are. They are the original blades that came in the kit. It is a trex250 DFC Plus.
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Great,
make sure that frequency for the cyclic servos is not higher than 200Hz.

Pithup Compensation in the Advanced tab can be configured to 0.
You can start with Cyclic Gain value around 40-50%.
Spirit System developer
Top
Post Reply

Return to “Support”