Page 2 of 2
Re: Issue: No cyclic to left side after 2 min flt in Stab Ko
Posted: Thu 18. Oct 2018 7:19:42
by ZeXx86
Ah, that is great.
So maybe just by disconnecting the fan it will all work well.
Could you please disconnect it for a try? It should handle also 3D flight without the fan on your model.
HobbyWing fans are unfortunately creating ultrasound that is disturbing the sensors a lot. For this reason disconnecting it it could be all solved.
Re: Issue: No cyclic to left side after 2 min flt in Stab Ko
Posted: Thu 18. Oct 2018 9:27:04
by tabbie
I have removed the fan. Trying again this evening.
Re: Issue: No cyclic to left side after 2 min flt in Stab Ko
Posted: Sat 20. Oct 2018 6:46:43
by tabbie
I have flown the heli yesterday, perfect weather.
I changed the following before the flight, removal of the ESC fan hobbywing 100A platinum, I have changed the GEOLINK to a closer position about 10cm away from tailservo. I have wrapped the GEOLINK cable with aluminium foil from a chocolade bar and grounded the foil to the tail boom.
The issue is gone, everything is good now.
(solved)
Re: Issue: No cyclic to left side after 2 min flt in Stab Ko
Posted: Sat 20. Oct 2018 7:34:31
by enied
tabbie wrote:I have flown the heli yesterday, perfect weather.
I changed the following before the flight, removal of the ESC fan hobbywing 100A platinum, I have changed the GEOLINK to a closer position about 10cm away from tailservo. I have wrapped the GEOLINK cable with aluminium foil from a chocolade bar and grounded the foil to the tail boom.
The issue is gone, everything is good now.
(solved)
I did buy a Sunon MC30100V2-A99 fan for my hobbywing 100A V3 platinum and use it. No problems caused by the fan at all.
BR Eugen
Re: Issue: No cyclic to left side after 2 min flt in Stab Ko
Posted: Sun 21. Oct 2018 19:21:44
by ZeXx86
That is great! Thank you very much for the message!