Page 2 of 2
Re: Trex 150
Posted: Fri 25. Oct 2019 19:24:49
by tomsl
with 40% Rudder Gain you can fly but it swings in both directions 20mm.
does it make sense to give you my settings?
Thank you for your help
Re: Trex 150
Posted: Tue 29. Oct 2019 23:17:10
by ZeXx86
Yes please. Send your settings. You can attach it here.
Re: Trex 150
Posted: Wed 30. Oct 2019 17:31:24
by tomsl
Hi
here my settings
Thank you very, very, very much
Re: Trex 150
Posted: Tue 05. Nov 2019 17:05:57
by tomsl
Hello what's happening??????
Re: Trex 150
Posted: Fri 08. Nov 2019 8:23:34
by ZeXx86
Hello,
here is the special firmware for you:
http://spirit-system.com/dl/fw//spirit-fw-2.6.5.4df
You can download and flash it.
After flashing Pirouette Consistency will behave as if the values are divided by half.
So value 160 will work as 80.
For the first try I recommend to set value 180 now.
I hope it will help you.
Re: Trex 150
Posted: Fri 08. Nov 2019 17:30:02
by tomsl
Hello
Now that's what I call customer service - awesome awesome awesome awesome!!!
I`ll tell everyone about my experience with Spirit System in my club.
I've already made a few test flights. The problem is almost gone, all I have to do is play with the setting a bit more.
Thank you!
Re: Trex 150
Posted: Wed 13. Nov 2019 19:34:24
by caven
Can you send photo how you install uspirit?
Thanks
Re: Trex 150
Posted: Wed 13. Nov 2019 19:36:54
by ZeXx86
You are welcome! New official Spirit firmware will be prepared for this. So that you will be able to set much lower values of the Pirouette Consistency.
Re: Trex 150
Posted: Mon 27. Jan 2020 4:24:11
by tomsl
sorry i only saw it now
do you still need photos?