Spirit System

Hello,

our new update will be ready during following week. There will be improvements mainly for GeoLink v2, but also for v1 and log viewer.

Sounds great

ZeXx86 wrote:Hello,

our new update will be ready during following week. There will be improvements mainly for GeoLink v2, but also for v1 and log viewer.

I think we have made great progress and overall performance was improved noticeably for all GeoLink features.
Also other things were improved such as logging, including logging for Spirit GT/GTR, Spirit Settings window now remember its size all the time, etc.
We are doing testing now.

This will be great.

ZeXx86 wrote:I think we have made great progress and overall performance was improved noticeably for all GeoLink features.
Also other things were improved such as logging, including logging for Spirit GT/GTR, Spirit Settings window now remember its size all the time, etc.
We are doing testing now.

I am new to Geolink - just got my first V2 and I am testing it on Blade 330s with altitude limit and RTH functions set on separate channels. The altitude limit function works fine - no problems at all.

BUT when I activate RTH the tail of the heli shakes up and down (vertical direction). I have tried with various vertical gains - from 30% to 90%, and with different stabilization modes - acro rescue, stabilization, and scale stabilization. No change at all.
Please advise how to resolve.

pb3d wrote:I am new to Geolink - just got my first V2 and I am testing it on Blade 330s with altitude limit and RTH functions set on separate channels. The altitude limit function works fine - no problems at all.

BUT when I activate RTH the tail of the heli shakes up and down (vertical direction). I have tried with various vertical gains - from 30% to 90%, and with different stabilization modes - acro rescue, stabilization, and scale stabilization. No change at all.
Please advise how to resolve.

I had seen that on 3.4.1 and GeoLink 1.3.0
3.4.2 and 1.3.1 corrected that for me ... Just have the altitude instability on RTH
climbs beyond my set point then falls below , climbs above
found that momentarily activating altitude (hold) when it gets to about my set point it stops and holds RTH

Understand next version will help this

Regards

RAW580
Spirit GTR 3.4.3
GeoLink v2 1.3.2
Return to home altitude set to 15M
Gains set to 80% on GeoLink (aid)
Auto Landing set to 45%


RTH stable (no oscillate)
Altitude hold stable (no dips)
Auto land also good (may change gain to 35%)

Thanks for the great support !

Regards,

Sounds good. Also the two gains H and V same value ?

cwdrew wrote:RAW580
Spirit GTR 3.4.3
GeoLink v2 1.3.2
Return to home altitude set to 15M
Gains set to 80% on GeoLink (aid)
Auto Landing set to 45%


RTH stable (no oscillate)
Altitude hold stable (no dips)
Auto land also good (may change gain to 35%)

Thanks for the great support !

Regards,

Dr.Fleming wrote:Sounds good. Also the two gains H and V same value ?

cwdrew wrote:RAW580
Spirit GTR 3.4.3
GeoLink v2 1.3.2
Return to home altitude set to 15M
Gains set to 80% on GeoLink (aid)
Auto Landing set to 45%


RTH stable (no oscillate)
Altitude hold stable (no dips)
Auto land also good (may change gain to 35%)

Thanks for the great support !

Regards,

Default horizontal was 100% and vertical 80%
I reduced the horizontal to 80%

Saw a new release was out and just quickly ran a couple of packs

I’ll try more settings this coming weekend weather permitting

Regards

Hello ZeXx86,
it would be nice if the announcements for the software updates could also be found at the top of the announcements.
Otherwise I only find the updates randomly.
Regards
Gerd