Page 8 of 10

Re: ESC Telemetry

Posted: Mon 17. Apr 2017 19:09:41
by flydus
Great news that the telemetry link becomes available soon. Hopefully the whole spectrum of values like with the jLog becomes available in the future.

Thank you Thomas


Gesendet von iPhone mit Tapatalk

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 7:24:16
by ZeXx86
No problem.

What other values you can see with JLog?

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:04:17
by gerry
Hello Tomas!
The following values are output from J LOg2.6 and Cosmic / Jive Pro:
1.RPM
2.mAh (capacity)
3.Battery Volt
4.Motor Ampere
5.RX voltage
6.Bec Volt
7.Bec Amp (only for Cosmic)
8.Temperature Fet
9.Temperature Bec

If that were possible, the J LOg come out with us all and are replaced by the cable.
The cables should have a total length of 40 cm.
1.The part from the 5-pin white plug to the Y distributor 30 cm (5-pin connector)
2. The part from the Y distributor to the Spirit (3 poles and 1 pole) about 10 cm, these JR plugs we would also ourselves to the correct length Krimpen.Einfach only the empty plug.

Greetings, Gernot
Please ask if this is possible?

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:10:27
by ZeXx86
For sure all the values can be displayed also by Spirit.
I guess that RX voltage = Bec Volt.

Regerding connectors, you can change it as you want. You can already buy the cable in our eshop.

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:15:12
by flydus
Screenshot aus JLC:

Image


Gesendet von iPhone mit Tapatalk

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:15:53
by gerry
Good news!
Sorry the RX voltage comes from the Jeti receiver, has nothing to do with Kontronik.
Bec Volt ond Bec Ampere come from Kontronik, whereby only the cosmos the Bec Ampere issues, why this is so we do not know?
With the cables it would be good if you can make them longer, the extensions are always error-prone?
Greetings, Gernot

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:18:06
by gerry
Sorry PWM I had forgotten !!

Re: ESC Telemetry

Posted: Tue 18. Apr 2017 8:22:17
by gerry
The respective maximum and minimum values are stored, recorded and displayed by Jeti itself!
As it is with other stations I do not know!

Re: ESC Telemetry

Posted: Mon 24. Apr 2017 15:43:02
by gabs_mex
Hello, is the Tribunus compatible yet or will have to wait for the new update and what is the ETA??
What connection will the Tribunus have to use to be compatible with spirit pro

Re: ESC Telemetry

Posted: Mon 24. Apr 2017 17:08:39
by ZeXx86
Hello,

http://manual.spirit-system.com/index.p ... _telemetry

It will be available in few days, probably this week. Cable is in our eshop available for more than week.