Page 1 of 1
Software v 2.0.0 used with Firmware v1.3.2
Posted: Fri 26. Feb 2016 22:24:48
by Malc1
If I upgrade to the latest software do I have to upgrade the firmware on the Spirit unit or will v1.3.2 still work OK?
I have two brand new units here that I want to upgrade to v2.0.0 and one fitted to a model on v1.3.2 that I want to leave alone for now.
Re: Software v 2.0.0 used with Firmware v1.3.2
Posted: Fri 26. Feb 2016 22:32:55
by ZeXx86
You have to use firmware 2.0.0. They are not compatible - there are major changes.
But you can install two software versions at the same time.
Re: Software v 2.0.0 used with Firmware v1.3.2
Posted: Fri 26. Feb 2016 22:38:53
by Malc1
Ok, that will do it for now.
Installing the new one won't over write the previous one then?
Re: Software v 2.0.0 used with Firmware v1.3.2
Posted: Fri 26. Feb 2016 22:44:47
by ZeXx86
It will rewrite older version if you will select same directory.
If you select different directory both software versions will be present, but you have to create shortcut for the older one to start it from the desktop.
Re: Software v 2.0.0 used with Firmware v1.3.2
Posted: Fri 26. Feb 2016 23:03:08
by Malc1
OK, done.
Both versions running off the desktop.
Thanks.
Re: Software v 2.0.0 used with Firmware v1.3.2
Posted: Wed 02. Mar 2016 4:22:02
by curmudgeon
Awesome update! Lots of improvements. Well worth updating.
Don't try updating just prior to going to the flying field. The new 2.0.0 update requires an almost brand new setup.