Spirit System

Is Stick priority doing the same with the flying feeling as expo in the RX ?
Kind regards Henrik

No, it is very different and should not be used instead of Expo.

Spirit unit does not use any expos internally, so you can set e.g. 25% in your TX.

Stick Deadband is just to match precision of your transmitter. Value of 10 should work fine with the most transmitters.

Yes, I know what stick deadband does. But what exactly does STICK PRIORTY do ? The function is in the stability tab.

ZeXx86 wrote:No, it is very different and should not be used instead of Expo.

Spirit unit does not use any expos internally, so you can set e.g. 25% in your TX.

Stick Deadband is just to match precision of your transmitter. Value of 10 should work fine with the most transmitters.

so is stick priority just deadband?

Sorry, my fault.
Stick Priority determine a degree to which you can control cyclic while the special mode is enabled.
When it is 0 you can't control it at all with your sticks (aileron/elevator).

So this will allow you to set how much you change direction.

OK, that make sense. The value is 0 to 16.
Is 16 equal to 100 % stick priority and 8 equal to 50 % and vice versa ?

Yes, it is.

OK. Thank you

Forums are great,instant fix or understanding