Spirit System

Version 1.1.0 was released!

It brings many new features and improvements:

• Brand new Graupner HoTT integration:
  • Full integration with HoTT radios without any limitations!
    
  • Computer is not needed at all!
    
  • Configuration anywhere and anytime directly in your radio.
    
  • Works with a different Receiver protocols - PWM, PPM, SRXL/SUMD.
    
  • Support for nearly all HoTT transmitters (all with display).
    
  • Telemetry support out of the box.
    
  • No need to update transmitter or receiver.
    
  • Big thanks to Graupner and TomasN.
    
  • For more info please check the HoTT integration guide [Heli guide].
• OpenTX Integration:
  • Added full support for Telemetry - unit will provide own data.
    
  • Vibrations visible as Fuel.
• Graupner SUMD protocol:
  • Channel mapping was modified so that no assignment changes are needed from clean radio profile.
    
  • Channel travel and reverses were modified so it will fit out of the box with clean radio profile.
    
  • NOTE: Radios MX-12/MZ-12 will require to set Gyro Gain to Channel 7 in the Channels.
• Rescue and Stabilisation activated by a Separate channel:
  • From now you can select which way you want to activate Rescue or Stabilisation modes.
    
  • You can select any available channel for activation.
    
  • New special function "F: Stabi function" was added for this purpose.
    
  • Very easy configuration described in our Guide, including old way.
    
  • Old way (by Negative gyro gain) is without any change.
• Rescue mode:
  • New parameter Rescue throttle that can over take throttle control upon Rescue activation (0% is disabled).
• Vibration Analysis:
  • Plots saved in the Vibration Analysis now contain Axis label and Vibration level.
• Improved Setup Wizard:
  • Setup Wizard has more usefull hints for beginners.
    
  • Links for manual and guides embedded in the software.
• New Servo List:
  • New comprehensive Servo List [Heli] specially tailored for Spirit units.
    
  • Any missing servo will be added to the list.
• Software enhancements:
  • Connection stability with the Wifi-Link module was improved, especially during inactivity.
    
  • Diagnostic tab is now displaying current mode more clearly - Head-Lock+Rescue, Head-Lock+Stabi., Normal, ..
    
  • Diagnostic tab is now displaying Unassigned state for Banks when unused.
    
  • When there is a problem during flashing, more helpfull instructions are provided.
    
  • When configuration is not saved during Bank channel assignment during Bank Comparison, window is not displayed.
    
  • Software can open http links in a Web browser.
    
  • When firmware and software versions are not matching, more details are displayed.
• Wifi-Link module:
  • Support for the latest 1.1.0 firmware.
    
  • New parameter "P: Rescue throttle" for Real-Time tuning added.
    
  • New function "F: Stabi function" for Real-Time tuning added.
    
  • Diagnostic tab is now displaying current mode more clearly - Head-Lock+Rescue, Head-Lock+Stabi., Normal, ..
    
  • Stability improvements in the Web UI.
• Wiki Pages:
  • Front page of the Wiki was redesigned to get overall overview.
    
  • Improved manual graphics style.
    
  • New Wiki pages.

You do not have to change any settings after the update from previous version. Please verify special functions in the General/Channels (if assigned).
Graupner SUMD users will need to update their channel mapping, channel reverses and travel to default.

Update for the Spirit units, Wifi-Link and OpenTX Integration is available in our Download section.