Page 1 of 1
is a uspirit-YGE-4649t-GeoLink combo possible?
Posted: Sun 12. Aug 2018 6:03:50
by drparker151
I've got a DX9 and an Oxy 2 with a uSpirit and a 4649T installed. I'm planning to replace the HW with a YGE ESC for full telemetry. Can I also add a Geolink? If so, how should all of these be wired?
Re: is a uspirit-YGE-4649t-GeoLink combo possible?
Posted: Mon 13. Aug 2018 7:56:57
by ZeXx86
Unfortunately YGE telemetry together with GeoLink is not possible. This is possible with Spirit Pro.
Re: is a uspirit-YGE-4649t-GeoLink combo possible?
Posted: Tue 14. Aug 2018 18:26:06
by drparker151
IS that just with YGE or is also a problem with HW and CC telemetry? In other words with the uSpirit you either have telemetry or you have GeoLink but not both?
Re: is a uspirit-YGE-4649t-GeoLink combo possible?
Posted: Wed 15. Aug 2018 7:33:32
by ZeXx86
With uSpirit and Spirit you can have CC telemetry and also Kontronik telemetry (together with GeoLink) - these two telemetries are not utilizing the SAT port.
With Spirit Pro everything is possible at the same time.
Re: is a uspirit-YGE-4649t-GeoLink combo possible?
Posted: Thu 16. Aug 2018 1:09:14
by drparker151
Excellent. I do have a spare CC around. The pro is a bit big to fit on the Oxy 2 and I also have spare uSpirit.