Page 1 of 1
Telemetry alerts about HW v4 and HoTT
Posted: Sun 13. Jan 2019 11:14:42
by vlk
Hello,
Can I receive and set telemetry warnings about HoTT when connecting a HW 130HV v4 to the Spirit Pro?
Or can I only see the values?
greeting
Siggi
Re: Telemetry alerts about HW v4 and HoTT
Posted: Mon 14. Jan 2019 17:44:18
by ZeXx86
Hello,
unfortunately this question should be forwarded to Graupner. They can help you with any particulars of the radio.
Re: Telemetry alerts about HW v4 and HoTT
Posted: Mon 14. Jan 2019 18:49:10
by vlk
is it not possible in future to set thresholds via the software?
The alarm itself comes from the Graupner transmitter.
That's exactly how it works with JLog, UniLog2 or UniSens.
Only with the newer or larger Graupner transmitters one can set alarm thresholds even in the transmitter.
greeting
Siggi
Re: Telemetry alerts about HW v4 and HoTT
Posted: Mon 14. Jan 2019 19:29:16
by TomasN
Yes, I also think that alarms are triggered (and also set) by sensors, e.g. Unisens-E, jLog and receiver (which also acts as sensor).
Transmitter can be used to set alarms threshold by telemetry menu for some sensors (Unisens-E, receiver). Alarms for jLog must be set in jLog setting PC software.