Spirit System

I am using a Spektrum IX12 and I have never used the stabilization and rescue together. I only used Head-lock + rescue activated by a momentary switch.
I need help setting up the TX and software so I can switch between stabilization on and stabilization off then be able to use my momentary switch for rescue for either mode. I have another thread that explains what I am currently trying and what the results are. I am using a mix for the rescue. Is there a better way to do this?

Here is the other thread:
http://spirit-system.com/phpBB3/viewtop ... =20&t=3348

SOLVED!!!!!!!
I used a couple AND OR mixes. Now I get the same value of -60 during Rescue for both head-lock and stabilization.

I will go out and fly tomorrow.

Thanks for all the help.