Spirit System

Hey,
i have a Hobbywing Platinum 80 V4 and a Spirit Pro.
For the following Sensors i get normal Information in Display: Temp, RPM, 5120 (Gov) and Fuel % (Vib), RSSI and RxBt.
Unfortunately are the Values from RB1V, RB1A, RB1C and RB2C zero.
Can anybody tell me what is wrong?
Connected with FrSXY QX7, Telemetrie activated in Spirit Unit.

Hello,

probably the firmware in your ESC is old. After update it should work.

Software in ESC is latest/newest. On spirit i have 2.6.4 on. no idea why it doesn´t work.
And what Sensors are A2 and 5120?

Do i Need OpenTX 2.2.4 to see how much MAH got out of the Lipo? I have 2.2.0

Hello,

OpenTX 2.2 should work well.
Unfortunately it look like there is problem with Telem UNI connection.
Alternatively there is old firmware in your ESC that has not support for the telemetry yet or Motor is not plugged in.
I am afraid there is very likely no other option.