Have a Blade 500 heli and don't really understand how to setup the stabilization. I'm using a Taranis X9D + radio. This is how i have the software setup.
On the Inputs tab (In OpenTX)
Input 6 -CH5: Gyr Weight -70 Switch SB Back
Gyr Weight 70 Switch SB Forward
On the Mix Tab
CH5 Gyr (+100) No Trim
I have no clue if this is correct or how to even test it. Any help is MUCH appreciated
In the Spirit Unit I have stabil set on and Coaxial
and the channels screen set to F: Stabil and channel 7.
When I hit my SG switch forward stabil function says on, When its back is says channel configured.
The Channel 5 always shows +3% and never changes with the switch movements (SB or SG
Spirit System
Support forum