[ Version 2.8.0 released! ]
Posted: Fri 07. Feb 2020 10:28:28
New version 2.8.0 was released!
No need to change any parameter after update.
Update for the Spirit units is available in our Download section.
- New temperature compensation for Spirit 2 units:
- Operating unit in a cold temperature with big difference should be trouble-free now.
- This could noticeable improve precision of all features.
- Operating unit in a cold temperature with big difference should be trouble-free now.
- Support for Tandem twin rotor helicopters:
- Support for Tandem helicopters, such as CH-47 Chinook models.
- Both swashplates are controlled by 4 servos in total.
- Available for all Spirit units.
- NOTE: Set Swashplate Type to Tandem.
- Support for Tandem helicopters, such as CH-47 Chinook models.
- Support for Spektrum SRXL2:
- Support for Spektrum SRXL2 satellites and receivers.
- New SRXL2 adapters for wiring will be available in our E-Shop.
- NOTE: Spektrum SRXL2 receiver wiring guide is available at the Wiki page.
- Support for Spektrum SRXL2 satellites and receivers.
- Original Spirit units with GeoLink module:
- FIX: GeoLink Broken Connection events were occasionally visible when closing the software.
- JETI EX Bus protocol:
- Channel centering calculation has been improved for better travel symmetry.
- Function F: Output to CH0 and AUX2:
- Output at CH0 and AUX2 is controlled from the beginning even during initialization.
- This can allow for example smooth control of the retractable gears.
- Output at CH0 and AUX2 is controlled from the beginning even during initialization.
No need to change any parameter after update.
Update for the Spirit units is available in our Download section.