Henseleit TDSF - Spirit 2
Posted: Tue 11. Aug 2020 10:59:30
Hi guys
My name is Timo and i am a Henseleit factory pilot.
I do a nice setup for the light slowfly helicopter TDSF.
Very very happy with the result it fly awesome.
Important:
The model is very lightweight and can not handle very agressive settings and high gains.
Stay at the soft side all the time.
I recommend to stay around 50% +/- 5% Gain and rotation rate around 8-10.
A Cyclic Limit is 13 degrees works fine and you stay in the limit every time
Tail Gain around 80-100% are fine
Setup:
MKS HV9767 Servos at swash
MKS HV9780 Servo at tail
Henseleit superlight main blades
Xblades 96 at tail
( you can use other blades like the MS Rapid 690 only change the cyclic feed forward to 7 )
Happy flying
Timo
My name is Timo and i am a Henseleit factory pilot.
I do a nice setup for the light slowfly helicopter TDSF.
Very very happy with the result it fly awesome.
Important:
The model is very lightweight and can not handle very agressive settings and high gains.
Stay at the soft side all the time.
I recommend to stay around 50% +/- 5% Gain and rotation rate around 8-10.
A Cyclic Limit is 13 degrees works fine and you stay in the limit every time
Tail Gain around 80-100% are fine
Setup:
MKS HV9767 Servos at swash
MKS HV9780 Servo at tail
Henseleit superlight main blades
Xblades 96 at tail
( you can use other blades like the MS Rapid 690 only change the cyclic feed forward to 7 )
Happy flying
Timo