Page 1 of 1
[SOLVED] missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 9:24:36
by fri09
Hello,
I recently set up my helicopter with a spirit 2 unit, combined with a Jeti DS-14.
Generally everything works fine, but unfortunately the diagnostic menu in the Jeti is missing. I updated all devices to the latest firmware.
What am I doing wrong?
Thanks for your help.
Frieder
Re: missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 9:28:45
by ZeXx86
Please update JETI integration files at the sdcard of your radio.
Download them from our web page.
Re: missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 9:50:30
by fri09
Thank you for the fast answer!
I updated the files right now but still no diagnostic menu.
Do I maybe need LUA for my jeti?
Re: missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 9:53:39
by ZeXx86
Unfortunately the files were not updated properly in this case.
You have to have Devices/SPIRIT.BIN, Devices/SPIRIT directories on your sdcard. All old files must be replaced with new ones.
No Lua needed.
Re: missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 10:37:09
by fri09
The problem is solved.
By mistake I copied the folder instead of the content.
Thank you very much and sorry for wasting your time.
Re: [SOLVED] missing diagnostic menu, Jeti DS-14 integration
Posted: Fri 21. Aug 2020 10:50:02
by ZeXx86
You are welcome
