Page 1 of 1
Power cur off while update the firmware
Posted: Tue 03. Nov 2020 0:15:27
by Syngorextor
Hi Thomas, while update my Spirit Pro suddenly the power cut off and any way how to reset or fix the problem will be great. Much appreciate even willing to send
over to you to fix it. Thank you.
Regards
Re: Power cur off while update the firmware
Posted: Sat 07. Nov 2020 10:26:24
by ZeXx86
Hello.
if update was from version 3.1. or older to 3.2. then there is high chance you will need to ship the unit to us for fixing.
Can you let me know what the Status LED is doing when you power up the unit?
Please observe also moment when you are connecting the battery. There could be a short flash of LED light.
Re: Power cur off while update the firmware
Posted: Mon 09. Nov 2020 9:48:00
by Syngorextor
Hi, great to get your feedback...thnk you! Ok,power on the unit 2 flashing and red light steady and about 97% to finalized the updating suddenly the power went off.(using scorpion backup guard) and suppect something went wrong with the battery...ok I'll send over to you and happy to pay all the cost. I'll inform once the unit send over to you.
Tomas, please before you send it back, I need to have a new |Spirit2 included on that packet for one single paymant. Ok, thank you and see you soon...

Re: Power cur off while update the firmware
Posted: Mon 09. Nov 2020 9:51:22
by ZeXx86
It is likely the unit can be fixed by you. I need only description of the behavior now. What the Status LED light is doing after powering the unit.
Re: Power cur off while update the firmware
Posted: Tue 10. Nov 2020 4:27:25
by Syngorextor
Hi Tomas, was late to check the forum and what I can say is,the unit has been sent by AusPost this morning to you. Tha light status after the failure was, red and off when connected the power. Glad to have your respond and by the way, also going to have some extra orders : 2X bluetooh adapter and 1X Spirit2 unit. Thank you very much and hope to get something exciyed from you soon.
Cheers mate..

Re: Power cur off while update the firmware
Posted: Tue 10. Nov 2020 8:16:36
by ZeXx86
Thank you, I hope the package value was declared under 25 USD otherwise they might return it

I believe it was possible to fix it within minute if there was a LED activity. The repair will be quick at least

Re: Power cur off while update the firmware
Posted: Wed 11. Nov 2020 1:18:03
by Syngorextor
Hello, the AusPost din't ask about the value declaration but what they told is to declared as "item/computer microship to repair. Any how hope everything
will be ok..! Thank you mate.

Re: Power cur off while update the firmware
Posted: Wed 11. Nov 2020 13:31:56
by ZeXx86
Great, then it is likely shipped as a gift.
Re: Power cur off while update the firmware
Posted: Thu 12. Nov 2020 1:50:42
by Syngorextor
Hello Tomas,looking good and espected the best from you as always. Thank you.
