Page 1 of 1
Spirit FBL blinking
Posted: Wed 25. Nov 2020 20:04:20
by grant22
I have a Spirit which I just updated. It was 'connected' and I flashed to the newest firmware (3.2) and now it just blinks (about twice a second) and will not connect.
Any ideas?
Re: Spirit FBL blinking
Posted: Wed 25. Nov 2020 20:09:23
by ZeXx86
Hello,
maybe you disconnected power before unit fully initialized.
It is enough to flash again in Recovery mode. Spirit Settings will ask if you want to open it when you will start it.
When you enter Recovery mode, select firmware file and then power up the unit.
Then click at the Flash button and all will be resolved.
Re: Spirit FBL blinking
Posted: Wed 25. Nov 2020 20:19:09
by grant22
Thank you and am trying that now. Does it take a long time? Im getting a rainbow status circle on the screen of the Mac but is taking a while.
Re: Spirit FBL blinking
Posted: Wed 25. Nov 2020 20:51:09
by ZeXx86
It should work immediately if you will proceed according instructions.
Re: Spirit FBL blinking
Posted: Wed 25. Nov 2020 21:00:17
by grant22
tried again, worked great, thank you