GEO Link Position Hold changes pitch

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
gjhernandez
Posts: 37
Joined: Sun 11. Oct 2020 21:48:21

Hello I am testing Geolink with Spirit pro unit. I already updated Geolink to 1.2.1.
When I activate Position Hold with a dedicated channel, the helicopter starts to descend. This is unwanted, I just want it to hold the position, but somehow it´s affecting pitch also.
Note; I don´t have Altitude hold enabled or configured.

Any suggestion?
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

the problem could be caused if you are using Bank Switching and one Bank has a different Pitch Range in the Limits tab.
Spirit System developer
Top
Post Reply

Return to “Support”