Spirit System

Hello,

i have the Spirit II with hot integration cable and Telemetry cable to an Align RCE-BLE130A Speed Controller.
Telemetry Data is displayed on the MC20 Hott Transmitter, integration Menue for the Spirit is working also fine.

The consumed capacity is counting up, ok.
Question is, if it is possible to set up a Capacity like lets say 3000mAh and then generate a Telemetry Alarm at the Hott MC-20.

Is there a setting for capacity telemetry Alarms ?

regards,
Timo

tgerdm wrote:Hello,

i have the Spirit II with hot integration cable and Telemetry cable to an Align RCE-BLE130A Speed Controller.
Telemetry Data is displayed on the MC20 Hott Transmitter, integration Menue for the Spirit is working also fine.

The consumed capacity is counting up, ok.
Question is, if it is possible to set up a Capacity like lets say 3000mAh and then generate a Telemetry Alarm at the Hott MC-20.

Is there a setting for capacity telemetry Alarms ?

regards,
Timo

I would of thought that the alarm would be set up in the transmitter, it is in Spektrum and Jeti.....

Hello 10x,

the MC-20 is outdated and does not support this,
I think i have to use a JLog S32 to get the Alarms.


thanks,
Timo

Hello,

in future update we plan to add Capacity alarm like this.