Spirit System

Hi guys,

Looking for some help on wiring a Radiomaster R161 S.port wire from the molex to an Frsky integration cable. Can this be done and if so what's the best way to wire the s.port wire to the integration cable?

On my larger frsky receivers with a dedicated S.port this is not an issue.

Flybarless unit is S2

Thanks for your help.

You have to solder a custom cable from which you take the S.Port and the + and GND to a female JR connector to put it on the integration cable.

+ => + to FBL and + to Integration cable
GND => GND to FBL and GND to Integration cable
S.BUS => S.BUS to FBL
S.PORT => S.PORT to Integration cable
RSSI => not used

Thank you!