Spirit System

Hey there...

i moved from Graupner Hott to FrSky and i use a Horus X10s express now.
In the Heli is a FrSky Archer R6 Receiver (ACCESS-Receiver with newest Firmware). In my Voodoo is a Kontronik JIVE and I want to use the JIVE-Telemetrie over the Spirit FBL in combination with the OpenTX integration.
It works... but very slow... I get many "Sensor lost"-warnings. The LUA-Script works too, but also very slow... Next thing is when i leave the LUA-Setupscript with "RTN" the Spirit is still blinking... I use the newest LUA-Skript for Version 3.2.0.

In my Logo480 i have a Unisens-E. I use the OpenTX integration as well. The Unisens Sensors are working very fast... the OpenTX integration is just as slow as the OpenTX integration in my Voodoo.
In both Helis is a Spirit Pro.

what am I doing wrong?

Regards - Nenno

Hi there...

i have now checked the wiring several times. I don't find a problem. The telemetry is still very slow and I still get the announcement "sensor lost". So you can't use the whole thing because the telemetry values are only updated every 3-5 seconds. The Spirit-OpenTX integration is just as slow and therefore hardly usable.

Please help.

Regards - Nenno

Hello,

it look like there are more problems with new Archer receivers - including Failsafe.

Could you try to disconnect all other sensors and retry if it will help?

Hello...

unfortunately, that didn't help. OpenTX integration is just as slow as with sensors.

Hey there...

since yesterday there is a new firmware update for the Frsky Archer RS receiver. I flashed it today and tested it with my problem helicopter ... The Kotronik Jive telemetry via the Spirit is now fast. Spirit integration could be faster but it works now too. The spirit no longer flashes when I exit the LUA script.
So the error is clearly due to the Frsky-Archer firmware.
Now I have to wait for the new firmware of the other Archer receivers because I want to fly the helicopter with the Archer R6.

Regards...

Nenno

Hello,

thank you very much for great message!
We are glad you have found the problem and hopefully it will be fixed soon in all receivers.