Rescue question with 3.2.2

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
mb-1953
Posts: 98
Joined: Tue 03. Mar 2015 15:55:50

I updated the firmware from 3.2.0 to 3.2.2. When I initiate rescue (acro) on the bench the swash moves slowly to the 80% collective I have selected and after the 1.5 second (by my selection) duration is met it returns to 50% (by my selection)slowly. I reflashed with 3.2.0 and it acts normally. My question is, "is this normal"? I am getting ready for maiden flight and want to test all of the features ie geolink, and rescue.
Thanks
Top
User avatar
tomsl
Posts: 33
Joined: Tue 10. Sep 2019 3:02:10
Location: Whitehall Michigan USA
Contact:
Contact tomsl

Hello

you can set the speed
Expert Settings -> Rescue - Smoothing factor
official hacker distributor USA
www.hackermotors.us
Top
mb-1953
Posts: 98
Joined: Tue 03. Mar 2015 15:55:50

You nailed it. On bank 0, it must have defaulted to 10 on the update. Thank you
Top
User avatar
tomsl
Posts: 33
Joined: Tue 10. Sep 2019 3:02:10
Location: Whitehall Michigan USA
Contact:
Contact tomsl

You are welcome
official hacker distributor USA
www.hackermotors.us
Top
Post Reply

Return to “Support”