Spirit System

As above what delay setting should the xlpower DS747RS 760μs Rudder Servo be set too as it's not listed in the servo list on the spirit website.

Thanks

Hi!

I'm using the same servo in XL520, with 0 delay. It is working very well.

So far I have for all high quality tail servos the "rudder delay" at 0 - 2.

Only for Align tail servos I had to use higher values: Align DS455HV = 8, Align DS 535 HV = 4

I use 4 and works perfect. But according to the manual it seems it should be 0