Spirit System

Hello,

I tried to connect my GT to my Jeti REX reciever. As in the manual I connected only the yellow cable with the rudder port and left the black and red cable off.

But GT is just 5 times jumping with swahsplate and nothing.

Everything worked with my Spirit II.

Thx.

Alex

I would have thought you still need to power the receiver for it to work.....

Thx for your reply . I also tried to "power" the reciever but still just 5 jumps of swahplate

Think I will downgrade to Spirit II and return the GT. Maybe its damaged. Or my jeti DS12 is to old.

Alex

Found the problem. Thx for the fast reply

Well i will be putting a GT on a heli today with REX3 and DS12 so will let you know how i go.....

AlexAusTelfs wrote:Found the problem. Thx for the fast reply

What was your problem?....Just incase...

You have to use the normal standard cable (yellow, red, black to connect RUD with your REX. I thought from the image your should only connect the signal cable (yellow line on the manual).

Alex

I hope there will be a solution soon, currently all Spirit are dead, every helicopter converted to BD Axon

NitroRex wrote:I hope there will be a solution soon, currently all Spirit are dead, every helicopter converted to BD Axon

What are you talking about dude?

NitroRex wrote:I hope there will be a solution soon, currently all Spirit are dead, every helicopter converted to BD Axon

My Spirits 2 and Pro are dead too. Please i need Solution!!!!The next Weekend is in the cellar!