Page 1 of 1
Strange servo behavior
Posted: Thu 12. Mar 2015 21:19:10
by clemsondave
Finishing a Goblin 500. Full size BK servos. When I give full right or left cyclic on the Tx and the servos reach the bottom, suddenly the elevator servo will jump either up or down. I don't see anything weird in the Tx servo display.
http://vid2.photobucket.com/albums/y2/c ... vu3kaq.mp4
Re: Strange servo behavior
Posted: Thu 12. Mar 2015 21:26:13
by ZeXx86
That is really strange behavior.
What is your Cyclic Ring - Aileron/Elevator Range?
Does it help if you decrease the value little bit?
What firmware do you have installed? If decreasing will not help, please try to redownload version 1.1.0 and flash it.
Re: Strange servo behavior
Posted: Thu 12. Mar 2015 21:37:25
by clemsondave
That seems to have solved it. Anything over 175 and it does that crazy thing.
Thanks!
Re: Strange servo behavior
Posted: Thu 12. Mar 2015 23:17:30
by ZeXx86
Perfect, thanks for the info!