Spirit System

Hello,
connecting a Jive Pro 120+ to the GTR Unit with the Master Cable set to THR and the Slave Cable set to E1 (configured to EX Bus) I get all Spirit Telemetry Values on my DC-24 Transmitter but they all show 0, except the Altitude. Here the readout shows correct Values. Do I need the "Spirit Telem Kontronik V2 Cable" to connect the Jive Pro to the SAT1 Port or is there another way without that Cable ?

Thanks for Support...

Heiko

Yes, the cable is needed.
Please see our guide: https://manual.spirit-system.com/index. ... _Telemetry
Other way is to buy Kontronik JETI TelMe module which is few times more expensive.