Spirit System

I've got 4 Spirit GT's in use now for all of my Electric Heli's so I'm pretty familiar with the wiring
However, I'm putting the GT on one of my Nitro models and I need a Remote Glow on a Switch

Channel 0 is open, but I can't find a way to assign it to a Channel

What am I missing

raceboy1 wrote:I've got 4 Spirit GT's in use now for all of my Electric Heli's so I'm pretty familiar with the wiring
However, I'm putting the GT on one of my Nitro models and I need a Remote Glow on a Switch

Channel 0 is open, but I can't find a way to assign it to a Channel

What am I missing

Will assigning function "F: Output to CH0" to an unused receiver channel work for you? There are options for mapping receiver channels to CH0 and AUX2 in the "receiver channel mapping" tab.

The only problem I have with the GT in this regard is it seems to be limited to 6 assignments. Depending on how many functions you already have setup, you may not be seeing the option to map CH0. You may have already used all of user defined function slots for other things.

Thanks, I total missed that. Found both the Channel O and Aux in the F function