Spirit System

New version 3.7.4 released!

• CRSF/ELRS Integration:
  • All CRSF/ELRS enabled radios can utilize native integration and telemetry support!
  • Spirit parameters can be easily configured directly from your CRSF/ELRS radio.
  • Telemetry is working properly with all ELRS receivers now.
  • Integration menu available at the Crossfire configure menu.
  • No Lua scripts are needed.
• CRSF/ELRS Telemetry:
  • Telemetry contains new variable VSpd displaying RPM - Headspeed.
• CRSF/ELRS Wiring:
  • Wiring for Spirit 2 units require to use the SYS port. Old wiring can be still used, but telemetry support is limited.
  • Wiring for Spirit GT units require to swap RX/TX pins from the previously used.
  • For wiring details please visit Wiki pages.
• Spirit Settings software:
  • Crossfire CRSF receiver type name was changed to ELRS/CRSF.
  • ESC Telemetry in the software - Advanced - ESC Setup will display Headspeed using configured Gear Ratio and Sensing Divider.
• Spirit Governor:
  • Default Governor Response value is 7.
  • Default Holding Performance value is 7.

Update for the Spirit Settings is available in our Download section.

NOTE: No need to change any settings after the update.