[Solved] Wave 1.0.33 / Battery counter not working anymore

[bovi7]

Battery counter doesn't count chosen battery sometimes. Instead it counts first battery.

[bovi7]

Today, I did 18 flights with four batteries. Three times, the counter of the selected battery was incremented by 1. The other 15 times, the counter of the first battery (which I call the “dummy”) was incremented by 1. I kind of regret this behavior, since I really like the feature very much...

[ZeXx86]

Thank you for the report. We are looking into the issue how this could happen and release fix as fast as possible.

[bovi7]

That'd be very nice. Thank you!

[bovi7]

This time the counter was most of the time increased correctly, then I switched to another model and switched back: The increased counters of the previous model were lost. Hope this helps.

[bovi7]

Another observation: I used 4 batteries. During the first lap every battery got an increased counter, the number was displayed correctly. During second lap every battery showed its previous value, in other words the counter was shown reduced by 1.

[bovi7]

It seems like the counter is increased correctly but not stored.

[bovi7]

Before flight counter = 87

After flight counter = 88

When chosing next battery list shows 87 again

[bovi7]

... and if chosen again counter is back to 87

[ZeXx86]

Hello,

we are already testing fix for the issue.
On tuesday we might have finished update with tweaks and some improvements.
The problem seems to be related to new Automatic Model Scanning feature. We are very sorry for the problem.