Page 1 of 1
stabi
Posted: Fri 05. Jun 2015 10:32:17
by Russell
Has the stabi steering changed in the latest firmware? And if so what has changed.
Thanks
Re: stabi
Posted: Fri 05. Jun 2015 11:06:02
by ZeXx86
Yes, it is changed completely.
Steering is very natural now. You can fly even 3D maneuvers easily. All is dependent on your settings.
There are two stabilisation modes.
The best is to try it
Re: stabi
Posted: Fri 05. Jun 2015 11:44:59
by Russell
Ok thanks. .better update and give it a try.
Thanks
Re: stabi
Posted: Fri 05. Jun 2015 14:06:38
by davidrex
Can you guys explain more in depth what do you mean steering and you can now fly easy 3D???
Re: stabi
Posted: Fri 05. Jun 2015 14:08:48
by djhandz
davidrex wrote:Can you guys explain more in depth what do you mean steering and you can now fly easy 3D???
+1 i would also like a more depth explanation
Re: stabi
Posted: Fri 05. Jun 2015 14:46:48
by davidrex
Rescue mode I understand is to level the helicopter and push up with positive pitch that's clear enough, but what exactly is the stabilization mode?? what does it do and what flight characteristics does it have?
Re: stabi
Posted: Fri 05. Jun 2015 19:32:52
by ZeXx86
Stabilisation is stabilizing helicopter to the horizontal position all the time so after releasing sticks it is back in horizontal position.
Rate of returning to the horizontal position can be configured - this allow to use it widely for different functions.
You can fly with scale helicopters or just learn maneuvers. So it can fly like coaxial helicopter.