Rescue at full pitch

[Angus]

Hello I was bench testing the rescue on my Goblin 500, through out most pitch settings it works as described, but at full pitch it has a reverse rescue pitch ( not sure if this is right, at full pitch it has no more positive pitch to give but why negative?)

Thanks for any info

Angus

[ZeXx86]

This is not a problem. It depends on your servo connection.
To solve the problem you can just move slider for the Rescue collective pitch to the negative value.
Then it will be good.

[Angus]

This is not a problem. It depends on your servo connection.
To solve the problem you can just move slider for the Rescue collective pitch to the negative value.
Then it will be good.

I have everything working right but at 100% pitch rescue goes downward not up (there is no more up to go) it this correct or should there be no rescue movement at 100%

not that anyone fly's at 100 pitch very often

Angus

[ZeXx86]

There should be rescue movement but always UP. It can be fixed by parameter Stabi/Collective pitch for the rescue so that you will set negative value.