Bt module stopped working

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Thank you.
Yes, I can confirm it is really OK.

I will be in contact with android app developer soon so we will know more.
Spirit System developer
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Tomorrow a flying buddy is taking his multimeter to the field so I can measure.
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Measured resistance, I get a 0 reading, no resistance, theres no short. The power to ground gives 38.53kohm
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

So, I sent it in?
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Your measurement is looking good, but there is no real explanation why it does not work. Especially if your units are working correctly with a USB interface.
Please ship the modules so we can examine it.
Spirit System developer
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

You said there should also be resistance between orange and red, but theres 0
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes, but very high resistance, which is correct. Mostly all multimeters will show you infinite resistance.
Spirit System developer
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Ok, will sent it in :(
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
HeliDave
Posts: 57
Joined: Sun 31. Jul 2016 21:54:17

Hi Tomas and Velocity, What was the resolution of this Bluetooth issue?
I am having exact same scenario, I used BT just fine on 1st Spirit Pro, but now bought another 2nd Spirit Pro and have exact same scenario as Velocity encounters identical to the pictures. I know for sure connections are perfect polarity wise, no wrong plug ins at all. They only thing that might be different in my case is I was using a Receiver battery pack of 4.8V to power the BT module, rather than using power from onboard BEC ESC, etc. Any help greatly appreciated! I LOVE SPIRIT PRO and all it's features and would love to use the BT module at the field for tuning. In addition, I should mention I am using an Android Phone with Spirit Settings App V2.3 I believe, and it worked on 1st Spirit Pro FBL unit. I tried unpairing that device and then pairing with the 2nd Spirit Pro it paired ok, but gave exact symptoms as Velocity had. Really curious to figure this out. Thanks in advice or help. Thanks, Dave
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hi Dave!
They only thing that might be different in my case is I was using a Receiver battery pack of 4.8V to power the BT module
This is the issue.

You have to use same power source for both unit and BT module. If not, you have to at least connect grounds together.
Then it will work well.
Spirit System developer
Top
Post Reply

Return to “Support”