Hello, these are my Diabolo setup files for all banks.
Bank 0 is the main bank, I have not done a lot of work on the others, but bank 2 is set up with a harder and faster feel.
Diabolo Setup?
- Attachments
-
- Diabolo 2.4ds
- Bank 2
- (255 Bytes) Downloaded 175 times
-
- Diabolo 1.4ds
- Bank 1
- (255 Bytes) Downloaded 160 times
-
- Diabolo 0.4ds
- Bank 0
- (255 Bytes) Downloaded 184 times
-
ChrisTTian667
- Posts: 31
- Joined: Thu 28. Aug 2014 10:11:26
- Location: Germany / Osann-Monzel
- Contact:
I would be interested in Triabolo 700 Setup too.
I will use the Spirit Pro in the Triabolo, but i assume that makes no difference to a normal Spirit, right?
cheers,
Chris
I will use the Spirit Pro in the Triabolo, but i assume that makes no difference to a normal Spirit, right?
cheers,
Chris
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Settings should be similar, altough configuration of the rotation rate, cyclic gain and cyclic feed forward may be different to achieve similar behavior.
Spirit System developer
-
fernieheliman
- Posts: 8
- Joined: Tue 29. Dec 2015 3:34:33
I had a Spirit on my Diabolo for a while now , I have to figure out how to post it here ...
or what parameter do you need to know ?
or what parameter do you need to know ?
-
ChrisTTian667
- Posts: 31
- Joined: Thu 28. Aug 2014 10:11:26
- Location: Germany / Osann-Monzel
- Contact:
It would be awesome, if Tomàs could add Di-/Triabolo Presets in the next version of the configuration tool. 
I added my settings for the Triabolo. The Rescue function is not enabled via Bank-Switch but will be enabled via two -100% Mixer in my Jeti DS. I prefer that because the rescue will always work with correct tail gyro settings. I only use the different Banks to switch between different Rollrates.
Tail Gyro is also set via TX.
Idle 1 75% - 1200rpm
Idle 2 70% - 1400rpm
Idle 3 65% - 1800rpm
best regards,
Chris
I added my settings for the Triabolo. The Rescue function is not enabled via Bank-Switch but will be enabled via two -100% Mixer in my Jeti DS. I prefer that because the rescue will always work with correct tail gyro settings. I only use the different Banks to switch between different Rollrates.
Tail Gyro is also set via TX.
Idle 1 75% - 1200rpm
Idle 2 70% - 1400rpm
Idle 3 65% - 1800rpm
best regards,
Chris
- Attachments
-
- triabolo2.4ds
- (255 Bytes) Downloaded 140 times
-
- triabolo1.4ds
- (255 Bytes) Downloaded 140 times
-
- triabolo0.4ds
- (255 Bytes) Downloaded 147 times
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
ChrisTTian667 wrote:It would be awesome, if Tomàs could add Di-/Triabolo Presets in the next version of the configuration tool.
I added my settings for the Triabolo. The Rescue function is not enabled via Bank-Switch but will be enabled via two -100% Mixer in my Jeti DS. I prefer that because the rescue will always work with correct tail gyro settings. I only use the different Banks to switch between different Rollrates.
Tail Gyro is also set via TX.
Idle 1 75% - 1200rpm
Idle 2 70% - 1400rpm
Idle 3 65% - 1800rpm
best regards,
Chris
+ 1 to add as preset on the software 550 - 700 Di/Tri
