DSMX Bind problem.

[Bravo]

Using DX6i. and two DSMX sats
Just received the Spirit pro today.
It has the latest firmware and connects to the pc ok.
I've tried 4 different sats with the same result.
Sat leds glow steady orange. Status on Spirit pro goes on and off, color red, at a slow pace.
Never saw rapid blinking on sats and status light never goes out.
Thanks for the help.
Larry

Also...
Did connect to PC and set RX type as DSMX/2

[ZeXx86]

Hello,

first from all, you have to start the software and set the Receiver type to the Spektrum DSM2/X. Then it is very important to save the settings (with CTRL+S or in the Backup tab).
After this, you can connect the bind plug and start the unit again.
Then it should bind the satellite (including blinking).

[Bravo]

Thank you.

Works now.

Thought I had clicked on SAVE....but evidently did not.

Cheers,
Larry

[ZeXx86]

Perfect, you are welcome!