Chanel mapping in Spirit

In case you would like to see some new feature in the software you can share it right here!
You can also report issue or odd behavior here.
Post Reply
Windsurfer1976
Posts: 19
Joined: Mon 20. Feb 2017 10:19:31

Hi Thomas,

im using a hott system with Gr-16 receiver and a mz-24 Sender.

As i use the sumd connection all channels are used by the system (Gyro, bank Switch included). I would like to use more than 8 channels on my gr-16 as i use the sumd connection (i need few more for led controller). But there is a issue with the channel mapping. The channels 8-12 can only be used by special functions.

It would be great if it will be possible to map the bank switching or gyro sens on chanels 8-12. Then i could use the free ports on my gr-16 via mapping to control my led controller.

Hope u understand my problem ;-)

Greetings Andreas
Top
ZeXx86
Site Admin
Posts: 12752
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hi,

you may try to remap the channels in your receiver.
This should be possible with GR-16 if I am not wrong.

Thank you for your suggestion!
Spirit System developer
Top
Windsurfer1976
Posts: 19
Joined: Mon 20. Feb 2017 10:19:31

Hi Thomas,

thank you for your reply but this is not possible. If I map chanel 9 to port 1 then it goes through sumd on chanel 1.

If I could select gyro gain or bank switch to chanel 9 - 12 it would work....

Greetings Andreas

Gesendet von meinem SM-G800F mit Tapatalk
Top
ZeXx86
Site Admin
Posts: 12752
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Thank you for the details.

I believe it will be possible to implement it in the future updates.
Spirit System developer
Top
Windsurfer1976
Posts: 19
Joined: Mon 20. Feb 2017 10:19:31

Thank you Thomas

Gesendet von meinem SM-G800F mit Tapatalk
Top
Post Reply

Return to “Wishlist / Bug report”