My main gear is 150 teeth, motor has 9 so my ratio is 16.66
But i dont seem to be able to select above 12 ???
Is there a simple workaround or am I missing something
Setting up governor
What helicopter do you have?
Do you know motor pole count?
Yes, there is a workaround so it will work well.
Increase Sensing Divider so that value of Gear Ratio * Sensing Divider is same or near.
This mean, if you have 10 poles (5 for sensing divider) than result will be: 16.66 * 5 = 83,3.
7 for sensing divider and 11.9 as gear ratio will give you the same result.
If you can give motor pole I can tell you exact values.
Do you know motor pole count?
Yes, there is a workaround so it will work well.
Increase Sensing Divider so that value of Gear Ratio * Sensing Divider is same or near.
This mean, if you have 10 poles (5 for sensing divider) than result will be: 16.66 * 5 = 83,3.
7 for sensing divider and 11.9 as gear ratio will give you the same result.
If you can give motor pole I can tell you exact values.
Spirit System developer
Tomáš, why do we have those limits? Are they really needed? all these "workarounds" are confusing (the other one is about RPMs)...
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Coco66: The limits are very same as what you can find for example in the VBar. Normally such gear ratios are abnormal. At the time it was designed there were basically no cases like this.
New update will have wider range.
tiriips: Set Sensing divider to 6 and Gear Ratio to 8.30. Then it will be fine.
New update will have wider range.
tiriips: Set Sensing divider to 6 and Gear Ratio to 8.30. Then it will be fine.
Spirit System developer