ESC Throttle Cable Channel Question

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
sawacs
Posts: 26
Joined: Tue 02. Jan 2018 22:04:40

I am setting up a Spirit Pro FBL on my Trex 700x and have a question regarding the throttle cable.

Specs:
Spirit Pro
Jeti DS-16
Jeti REX10 with a R3RSW in dual path
Hobbywing 120a V4

Where exactly should the esc throttle cable be plugged in on the Spirit Pro?
I have the following channels:
Aux1
Aux2
Chan 0

Lastly, I will be using the Hobbywing governor rather than the Spirit governor

Thanks!

Update: I figured out where the connection goes and everything is working great.

Cheers!
Top
Syngorextor
Posts: 47
Joined: Thu 12. Oct 2017 1:06:36

sawacs wrote:I am setting up a Spirit Pro FBL on my Trex 700x and have a question regarding the throttle cable.

Specs:
Spirit Pro
Jeti DS-16
Jeti REX10 with a R3RSW in dual path
Hobbywing 120a V4

Where exactly should the esc throttle cable be plugged in on the Spirit Pro?
I have the following channels:
Aux1
Aux2
Chan 0

Lastly, I will be using the Hobbywing governor rather than the Spirit governor

Thanks!

Update: I figured out where the connection goes and everything is working great.

Cheers! :)
I Believe on AUX1 channel, but please double check the manual...hope this help and good luck.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes, it is AUX0 port as described in the manual (Wiring section).
Spirit System developer
Top
Post Reply

Return to “Support”