uSpirit - power capacity

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Bladecrasher
Posts: 98
Joined: Wed 16. Mar 2016 15:58:50

I would like to use a uSpirit I already own on a Blade 270 which uses the Spektrum H3050 and H3060 servos. Are those servos going to pull to much current for the power-bus in the uSpirit?

I believe these servos are the same as what is used with the 230s.

Thoughts...
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:

They are just fine for uSpirit.
uSpirit can handle micro servos without any problem.
Spirit System developer
Juan Cobo
Posts: 9
Joined: Wed 08. Aug 2018 9:35:57

I have the doubt if the uspirit can go well in a minicomet, by size I would be much better, is it possible?
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:

You will need 4x JST-Servo adapters. Then it will work. But normal Spirit unit is just fine for Mini Comet.
Spirit System developer
Post Reply