[SOLVED] srxl2 AR6610T

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
latjo-k
Posts: 131
Joined: Fri 06. Dec 2019 8:22:54

Any progress?
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

we have found the issue with certain AR full size receivers. I believe firmware that has fix for them will be available on monday.
Also we are preparing guide for wiring.
Spirit System developer
Top
latjo-k
Posts: 131
Joined: Fri 06. Dec 2019 8:22:54

I think its a diffrent,we can always count on Tomas and heas team that they always do ther best to satified
our needs.
I wonder if any other supplyer of fbl units put in so mutch effort as they do.
If we heli pilots stick to Spirit ther is no limit what he and heas team can bring out for us in the future.
//Lars
Top
tfmcnellist
Posts: 53
Joined: Thu 28. Aug 2014 20:05:23

looking forward to the revision.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

we have solved the problems with firmware update.
All SRXL2 receivers should work now.

Please flash this firmware:
http://spirit-system.com/dl/fw//spirit-fw-2.8.1.4df

Wiring diagram for AR6610T will be available tomorrow. For this receiver normal JETI Integration cable is needed (or you can make the cable at home).
Spirit System developer
Top
latjo-k
Posts: 131
Joined: Fri 06. Dec 2019 8:22:54

ZeXx86 wrote:Hello,

we have solved the problems with firmware update.
All SRXL2 receivers should work now.

Please flash this firmware:
http://spirit-system.com/dl/fw//spirit-fw-2.8.1.4df

Wiring diagram for AR6610T will be available tomorrow. For this receiver normal JETI Integration cable is needed (or you can make the cable at home).
Hi Tomas
I have tested the new firmware and there is some issues.
Its sems impossible to get throttle out to work,in diagnostik window(ch1)it moves from 0-100% but the esc is not responding.Iwent back to spm4649t just for testing and the esc starts up fine,whith the same settings
in unit (i only Changes recivertype).
And channel 7 bankswitching and 8 rescue dont respond(50%)at all in diagnostik window,same settings in tx DX9 as whith spm4649t.It sems that AR6610T only trasfer 6 channels.
Hope you can fix the problems or tell me if i doing something wrong.
Everything else works perfekt.
//Lars
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Sorry for the troubles.
After inspection we have found what is wrong.
Now also throttle from the unit will work.

http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df

You can also use Throttle output directly from the receiver.
Spirit System developer
Top
latjo-k
Posts: 131
Joined: Fri 06. Dec 2019 8:22:54

ZeXx86 wrote:Sorry for the troubles.
After inspection we have found what is wrong.
Now also throttle from the unit will work.

http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df

You can also use Throttle output directly from the receiver.
Hi
now trottle works,but what abaut ch7 and 8?
Ch5 gyro,it looks like it is reversed.The monitor in tx shows 70% in diagnostiks it shows -63
//Lars
Top
tfmcnellist
Posts: 53
Joined: Thu 28. Aug 2014 20:05:23

This was one of my original question, will all 8 channels work?
Top
tfmcnellist
Posts: 53
Joined: Thu 28. Aug 2014 20:05:23

latjo-k wrote:
ZeXx86 wrote:Sorry for the troubles.
After inspection we have found what is wrong.
Now also throttle from the unit will work.

http://spirit-system.com/dl/fw//spirit-fw-2.8.2.4df

You can also use Throttle output directly from the receiver.
Hi
now trottle works,but what abaut ch7 and 8?
Ch5 gyro,it looks like it is reversed.The monitor in tx shows 70% in diagnostiks it shows -63
//Lars

Any update to this question?
Top
Post Reply

Return to “Support”