Setup limits - on the Spirit or on the Tx?

[alex4orly]

I am new here and need to learn to hover first.
I want to set my Pitch range to : -5, 0, +8
Can I do that somehow on the Spirit Limit tab or only on my Tx?

Thanks for any guidance

[urgno]

you can do that in both places
but in my opinion is better to set the maximum pitch available on spirit ( +-10 / 12° depends on your mechanic )
then you setup the pitch curves in your TX so you can choose with a switch what curve to use

[xoexoe]

I believe that setting is on the Limits tab.

I agree with the post above. If you’re a beginner then do something like –10 deg / +10 deg, or –12 deg / + 12 deg. I’ve been flying 2 years and 12 degrees is plenty for me.

Use pitch curves in your TX to then get the actual desired pitch range.

[alex4orly]

you can do that in both places
but in my opinion is better to set the maximum pitch available on spirit ( +-10 / 12° depends on your mechanic )
then you setup the pitch curves in your TX so you can choose with a switch what curve to use

Yes, that is how I did it

Thanks