Spirit gov or Kontronik gov?

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
eric38
Posts: 11
Joined: Wed 09. Sep 2020 13:25:01

Hello,

Question, now i'm using the governor of my Kontronik Kosmik, can i use the Spirit governor with it?
I link the Tellme Jeti for the telemetry on the Spirit RS.
but i don't know where i find the rpm to plug on the Spirit RS...

Does somebody use his spirit with Kosmik for Governor?

And what is better? Kontronik gov or spirit gov?

Eric
Top
buttles
Posts: 156
Joined: Tue 16. Jun 2015 14:37:10

Hi Eric, do you have this cable? https://store.spirit-system.com/en/acce ... cable.html
If I read correctly you do. Use Sat 1 Port. Just leave the Spirit Governor disabled but Enable telemetry in Advanced page--Telemetry. Use Kontronik TelMe.
You will need to use Prog Unit to make sure the Telemetry parameters are correct in the ESC.
I have used the Kontronik ESC Govs in all my (3) equipped Helis and they are good.
Top
eric38
Posts: 11
Joined: Wed 09. Sep 2020 13:25:01

Hello,
No i'm using the telme Jeti from the Kosmik and plug on E1 (or 2?), the telemetry works well, no problem.
But i don't know how to to use the rpm signal on EI/2 for the Spirit GOV...
Eric
Top
buttles
Posts: 156
Joined: Tue 16. Jun 2015 14:37:10

If you have telemetry working Ok then I would just use the Gov in the ESC. Which I do, It's good.
Top
eric38
Posts: 11
Joined: Wed 09. Sep 2020 13:25:01

Yes me too, but i would like to know just for my information.
Eric
Top
Post Reply

Return to “Support”