[SOLVED] Spirit 3.4.0 - new rescue and stabilisation

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
User avatar
HeliMLM
Posts: 370
Joined: Tue 10. Mar 2020 14:36:22

Hello Tomas

i guess i do need some help with setting up the new rescue engaging options - i do not get it to run :oops:

what i've done: i have mapped additional channel #11 from a new switch to F:Rescue (normal) function (see screenshot). both, the old (ch#8) and new (ch#11) switch are working (see screenshot 2) independently.

at this moment the old switch (ch#8) was still working and starting rescue normal as setup in stabi tab. then i changed stabi/function to "select by channel" and the new switch (ch#11) did not work - no reaction at all. after this config change in Diagnostics tab it tells me: "Rescue: configured (Gyro channel)". see screenshot.

i've removed old switch (ch#8) setup completely from setup in Spirit - no change. then i resetted my testing Spirit RS and configured all again with new switch only: no change.

... what did i misunderstand or what have i done wrong? i really love this new engaging options and want to use them asap :)
Attachments
diagnostics after change.png
new channel working.png
new channels.png
Last edited by HeliMLM on Wed 25. May 2022 8:34:35, edited 3 times in total.
cheers
Michael
Top
Mattes61
Posts: 628
Joined: Wed 21. Dec 2016 15:13:38
Location: Germany

- deleted -
Last edited by Mattes61 on Thu 26. May 2022 18:38:43, edited 1 time in total.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

The best thing is to remove F: Stabi Mode and start with nothing. Add rescue function only and check.
Then it also depends on what is configured in other banks, because you can set all banks differently for Stabi/Function.
Spirit System developer
Top
User avatar
HeliMLM
Posts: 370
Joined: Tue 10. Mar 2020 14:36:22

Hello Tomas,

yes - this is what i did in the meantime:

1. another factory reset of Spirit RS, ch #7 set to bank switch, ch #8 set to F: Rescue. nothing else setup.
2. Stabi / Function set to "select by channel" (all banks identical) => does not work.

and again: Diagnostics screen showing Rescue: activated (Gyro gain)... see screenshot.

screenshots attached, settings file attached....

thx a lot
Michael
Attachments
channels.png
stabi.png
diagnostic.png
Last edited by HeliMLM on Tue 24. May 2022 20:37:01, edited 2 times in total.
cheers
Michael
Top
User avatar
HeliMLM
Posts: 370
Joined: Tue 10. Mar 2020 14:36:22

... plus the settings file:
Attachments
Spirit RS Test.4ds
(255 Bytes) Downloaded 158 times
cheers
Michael
Top
User avatar
HeliMLM
Posts: 370
Joined: Tue 10. Mar 2020 14:36:22

Hello Tomas,

another observation: when i load the settings file i attached above in Spirit settings with Spirit RS unit connected all is OK, but if i load it in DEMO mode, Stabi Function is set to "Rescue (automatic)" !!! (both is option number 8 - as Rescue (automatic) is not available on RS unit). repeated several times as i did not believe it first :)
cheers
Michael
Top
Mattes61
Posts: 628
Joined: Wed 21. Dec 2016 15:13:38
Location: Germany

- deleted -
Last edited by Mattes61 on Thu 26. May 2022 18:39:20, edited 1 time in total.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

we are very sorry for inconvience. There was really a problem with some units.
Please download new revision r2 of the Spirit Settings from our web pages. Then all should work well.
Spirit System developer
Top
User avatar
HeliMLM
Posts: 370
Joined: Tue 10. Mar 2020 14:36:22

Hello Tomas

thx a lot for the quick fix in settings software... now Spirit RS is working as expected (was only my "bench testing unit", so no problem). great support as always!
cheers
Michael
Top
Post Reply

Return to “Support”