Spirit 2 with double SRXL2 Vs Spektrum Integration

[nmsantarelli]

Good morning everyone on the forum,
I purchased three Spirit2 for the three helicopters and everything is ok.
I also purchased the WiFi module to make adjustments via the smart phone and everything is ok.

Yesterday I wanted to try the integration spektrum on the radio (DX6e with last update firmware) but I couldn't. In the introduction I will tell you what I have as components and how I connected them (although I did everything according to the manual).

The materials installed on the helicopter are:
- Spirit2
- Two SRXL2s, one mounted with the "Spektrum SRXL2 adapter" cable and another with the "Spektrum SRXL2 Satellite adapter" cable
- Spektrum DX6e radio

The problem is: When I select advanced programming on the radio, the radio writes "Connecting?" and after a while "Connection Error"

Did I do something wrong ?

I would be grateful for advice.

Thanks for reading, even more so if you reply to me.

[ZeXx86]

Yes, you should not access integration from Advanced programming.
Please see this page:
https://manual.spirit-system.com/index. ... ntegration

[nmsantarelli]

Yes, you should not access integration from Advanced programming.
Please see this page:
https://manual.spirit-system.com/index. ... ntegration

Perfect thanks