Spirit RS Can it support 3S Lipo (12.6v)?

[shi555]

Can 3s Lipo (12.6v) be used to access Spirit RS gyroscope when using external BEC?
and I am using 4 main rotor blades（800mm paddle length）. Should the Cycllc phase in the expert Settings be changed (the default is 0 degrees)? If so, what value should be changed

[Habásek]

Spirit RS is only 3,2 - 10,0 V !!
https://store.spirit-system.com/en/spir ... it-rs.html

And 4 main rotor head does not need any virtual rotation of the cyclic plate.