Tuning - Sensor/Rotation Rate?

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
kcasser
Posts: 26
Joined: Tue 11. Oct 2016 14:35:40

In the Tuning instructions, the first section mentions "Sensor/Rotation Rate" and that it should be between 8 and 11. I can't find this parameter anywhere. I see Rotation Speed, but that is in degrees per second. What am I missing?
Top
Sepp62
Posts: 23
Joined: Sat 07. Feb 2015 22:14:51

Tuning instructions are not up to date for version 4.0, where rotation rate now is in degrees/s.
Top
kcasser
Posts: 26
Joined: Tue 11. Oct 2016 14:35:40

Aha! What should a normal setting be?
Top
ExCCHP
Posts: 89
Joined: Wed 12. Jan 2022 17:00:01
Location: British Columbia, Canada

Copied from the update log:

Configured Rotation Speed is now all in Degrees/s. Default rates are 250 °/s for Cyclic and 300 °/s for Rudder.

In my case the default was 250° & 350°.
I found the cyclic was good at 250° but the tail was too slow even at 360° so I raised it to 450°. But all personal preference. Easy enough to adjust on the fly then lock it in when you get it to your liking.
Top
Post Reply

Return to “Support”