Incomplete Heli Assistant while using Jeti DS24II

[JENS]

Hi,

I just started to use the Spirit GTR together with Jeti DS24 II. I switched from Vbar.
I did the set up via PC.
For some reason, I cannot see all settings as soon as I try it via the Jeti controller. For example I do not see the orientation of the unit on the first screen.
There is a lot missing.
As soon as I plug in the Laptop, I can find everything on the Jeti. I also can change any setting.
As soon as I unplug the Laptop, everything disappears again.

Software on both sides is 4.0.0.

What's wrong?
Thank you very much for any help!

Jens

[ZeXx86]

Hello,

this is very likely because you are in Bank 1 or Bank 2.

Switch Bank to 0. Then all base settings will be accessible.

[JENS]

Hi,

This sounds absolutely reasonable!
How can I switch do Bank 0 from the controller?

Thanks again for the quick help!!

[Habásek]

https://www.youtube.com/watch?v=_3AGrc9 ... Ww3O4UEQ5a

Setup with Jeti TX on Youtube.